Click on some Images to Enlarge! |
|
Steel DROP FRONT DRAWER STAY with Statuary Bronze Finish
Dimensions when open: 7-1/4"long x 3/4"wide x 3/32"thick
For use on Drawers or Slant Front Secretaries ~ Reversible for Right Hand or Left Hand Mounting
NOTE: These support hinges are manufactured to open to less than 180 degrees to allow for the application of load which stretches the hinge to approach 180 degrees when installed instead of sagging past the 180 degree mark. Available in two finishes
Bright Brass D-1758 $5.40 each
Antique Brass AD-1759 $5.40 each
|
 |
Brass Plated Steel DROP FRONT DESK/LID STAY
Overall: 10-1/2" x 9/16"wide
On drop front desks, stay mounts to inside of desk while swivel foot attaches to drop front. In chests, stay mounts to inside of chest and swivel foot attaches to the lid.
SOLD BY THE PAIR D-2742 $9.61
|
 |
Overall Length - 9 1/2"
Mounts to inside of desk and to drop front. Reversible. Brass
This item is being phased out. Only one left in stock and it is without screws.
B-2744 $18.72
|
 |
Steel Adjustable Tension Sliding Slotted STAY with Statuary Bronze Finish
Overall: 10"long
Universal fit Has Finger-tip knob for tightening
AS-2745 $3.89
|
 |
Steel Anti-Slam LIFT-UP LID SUPPORT with Statuary Bronze Finish
LEFT HAND ONLY
Internal Self-Balanced Lift-Up Lid Support for toy chests, hope chests, piano benches, etc. AS-2747 $5.33
|
 |
Stacking Bookcase Equalizers
Leg with Extension - 24" long x 5/8" wide
Extension - 13" long x 1/4" wide
Long Leg - 29 1/2" long x 5/8" wide
Includes screws and screw eyes for installation
Steel
Used on E, G, and H Series Sectional Bookcased by Globe-Wernicke. Will work on Macey and oher makes of this dimension in conjunction wiht Brackets and straps
S-2789 $17.64
|
 |
Stacking Bookcase Equalizers
Leg with Extension - 24 1/4" long x 7/16" wide
Includes screws and 3 S-3027 screw eyes for installation
Steel
Used on C and SD Series Sectional Bookcases by Globe-Wernicke
S-2790 $13.42
|
 |
Step Back Shelf Bracket for Globe-Wernicke "C" or "D" style Stacking Units. Reproduced from original parts.
Overall: 3-1/8"long x 27/32"wide (for 3/4"thick wood)
Antiqued Brass Plated Steel. Brass Escutcheon Pins included.
AD-2796 $6.26
|
 |
Step Back Shelf Bracket for Globe-Wernicke "E" style Stacking Units. Reproduced from original parts.
Overall: 4-9/16"long x 27/32"wide (for 3/4"thick wood)
Antique Brass Plated Stamped Steel. Brass Escutcheon Pins included.
AD-2797 $6.79
|
 |
1/2" wide by 3/4" shelf support extension fits into a 1/4" hole. Statuary bronze finish on steel. Sold in lots of 12 AS-2781 $2.80 per dozen
|
 |
1/2" wide by 3/4" shelf support extension fits into a 1/4" hole.
Brass plated finish on steel. Sold in lots of 12
D-2781 $2.80 per dozen
|
 |
Spoon type shelf supports 1/2" by 1/2"
Pin - 1/4" diameter - Brass Plated D-2791 $2.20 per dozen
|
 |
Plain Steel drawer stop slightly concave. 3/4"high by 9/16" wide.
Z-3036 $2.38 per dozen
|
 |
Brass plated steel drawer stop 11/16" high by 3/4" wide.
Z-3097 $2.10 Per dozen
|
 |
Corner table leg brackets 4 5/8" long x 2"wide. Heavy Gauge Steel
Sold in lots of 12.
Screws NOT included.
S-2771 $10.92
|
 |
Each leg - 1 3/8" long from corner by 3/4" wide. Heavy Gauge Steel with Statuary Bronze finish. Sold in lots of 12. Screws included.
S-2773 $3.98 per dozen
|
 |
Single hole keyhole fastener 1 5/8" high by 9/16" wide. Zinc plated steel.
S-2721 $.50 each
|
 |
Bookcase Door Stop and Pivot Bracket Set
Steel Bracket Overall - 7/8" wide x 7/8" high
Installs on backside of bookcase door
Steel Stop 7/16" projection when installed on inside of bookcase frame
Sold by the set to mount one door.
S-2794 $4.86 each
|
 |
Bookcase Door Liner
10 1/2" long x 1" high with 1/4" roller base
Steel
Mount on inside of cabinet for smooth door movement
Sold as a pair S-2795 $6.82 per pair
|
 |
Bookcase Side Straps
Steel with Black Finish
Installed on the outside of each section to align stacks. Each strap has an interlocking clip for side to side alignment of multiple stacks.
Includes 2 Steel 3/4" long x 5/16" wide wedges
Sold by the pair (1 Right Hand and 1 Left Hand), but comes in two lengths.
11 1/2" long x 1" wide BL-2798 $14.82 per pair
17 1/2" long x 1" wide BL-2799 $17.98 per pair
|
 |
Turn button
3/4" long by 1/4" wide Brass plated stamped steel. Nail not included. Sold by the dozen. D-3039 $1.38 per dozen
|
 |
Picture Hanger
Sold by the dozen
1 1/8" high by 1/2" wide Brass plated stamped steel.
D-3059 $2.62 Per dozen
|
| 10% Discount on Orders $50.00 or More. |
