Our Spraying Equipment Can Only Be Order By Phone
1-888-498-4345

LYNX-3™ HVLP CONVERSION SPRAY GUN

Converts your compressed air to HVLP. Simply connect our LYNX™-3 HVLP spray guns directly to your shop's air line and you are ready to reap the benefits of a High Volume Low Pressure spray system. Operating at standard air line pressures, the LYNX™-3 HVLP Guns create less than 10 psi of pressure at the gun while maintaining a minimum of 65% transfer efficiency. No matter what you are spraying, you are sure to save up to 50% in material consumption. The LYNX™-3 HVLP guns are the best on the market based on customer feedback and benefit to cost ratio. Don't let the price fool you! 

It requires only 4 cfm of air flow only or, a 1 hp* ordinary shop compressor (3 hp recommended) to do an excellent spray finishing job with all sprayable materials including all HYDROCOTE® finishes and other water-based finishes. Other conversion guns currently on the market require a minimum of a 5 HP compressor to deliver less than equivalent results.

LYNX™-3 HVLP Guns are as easy to use as the high pressure gun you're using now. No complicated attachments, manifolds or large cumbersome hoses needed. Includes gun and cup gun assembly. Supplied with 1.5 mm atomizing set for the siphon feed type and 1.5 mm for the gravity feed gun. An optional  2.2 mm is available for spraying latex paints, enamels, and contact cement on the siphon feed and the gravity feed. Hooks up easily to a pressure pot. Just disconnect the cup gun assembly and you are ready to go. An incredible value for the money.

 LYNX-3 Siphon Feed  With Cup Gun Assembly $175.00
 LYNX-3  2.2 Atomizing set for siphon feed gun $55.00 
 LYNX-3-GF Gravity Feed  With Cup Assembly  $175.00
 LYNX-3  2.2 Atomizing set for gravity feed gun $55.00

Our Spraying Equipment Can Only Be Order By Phone
1-888-498-4345

* A 1 hp compressor will power both guns for short spraying sessions. For greater spray sessions, a 3 hp compressor is recommended